A good door has to be leveled according to the flooring and ground slope. This is where your jamb comes into play. To install the jamb the right way, nail measured pieces of wood together to form the jamb's frame. Level it out against the door frame by placing shims behind it.
Add door stops to the inside of the jamb to keep the door from swinging through it. To install a door jamb, start by measuring the door frame and cutting the wood to size. Next, add glue to the end of 1 of your longer pieces of wood and attach a shorter piece to it. Then, use a nail gun to secure the 2 pieces together before attaching the other side of the jamb in the same way. Once you've completed the jamb, lift it up into the door frame to make sure it fits.
If there are any gaps, slide shims, which are thin pieces of wood, between the jamb and the frame. Finally, nail the jamb in place and cut the shims to size with a utility knife.
To learn how to install door stops, read on! Did this summary help you? Yes No. Log in Social login does not work in incognito and private browsers. Please log in with your username or email to continue. No account yet? Create an account. Edit this Article. We use cookies to make wikiHow great. By using our site, you agree to our cookie policy. Cookie Settings. Learn why people trust wikiHow. Download Article Explore this Article parts. Tips and Warnings. Things You'll Need.
Related Articles. Article Summary. Part 1. Measure the width of the door frame. Break out the tape measure. You'll need to know how wide your door frame is so the jamb fits in it. Hold the tape measure up to the top of the door frame. Note the measurement and save it for later. Measure the sides of the door frame. Take your tape measure to one side of the door frame.
Note the length and mark this on one piece of wood. If you have level ground, this measurement will be the same for the other side. Most likely they'll be different, so measure the other side of the frame and mark its length on another piece of wood.
Don't forget to also measure the top part of the frame for the smaller piece of wood. Cut the wood. Suit up with safety gear, including gloves, safety glasses, and a visor, before turning on your circular saw. Thin the pieces of wood so they fit within the frame. Follow up by cutting their length according to the measurements you took earlier.
Part 2. Nail the wood together. Lay one of the longer pieces of wood on its side and add a bit of wood glue to the end. Attach the shorter piece to one end of the longer piece. Get your nail gun and hold it square on the outside of the area where the wood meets. Add the nails to secure the pieces together. Align the other piece of wood on the opposite side and attach it the same way.
Hold the jamb up to the door frame. Carefully move your newly-cut wood up into the frame. Since you measured, it should fit in there well. Align the left side against the wall and see if it appears level. Double-check this with a level. Level out the jamb with wood strips. After attaching the jamb to the frame, place wood strips shims under it. Make sure that you do not lift the jamb too much. Figure out where you need to place the shims to level the hinge side from top to bottom.
Get these strips from the home improvement store. Slip them between the jamb and frame as needed. Make sure to fasten the hinge side jambs directly to the stud. You can fasten them loosely in case you need to slide a jamb behind it, but it is best to keep it tight. Hold the door against the jamb to check for clearance. You can hold the jamb in place by lightly hammering in a few nails.
Place the door inside the jamb. The door needs to fit comfortably inside the jamb. Look for the gap between the door and jamb to be one-eighth of an inch. Add or remove shimming so the door fits.
When you're sure the measurements are correct, remove the door. Nail the hinge side of the jamb to the frame. Get your nail gun again. Learn why people trust wikiHow. Download Article Explore this Article methods. Tips and Warnings. Things You'll Need. Related Articles. Article Summary. Author Info Last Updated: July 24, Method 1. Decide what type of doorstop you want to install. There are 2 common types suitable for home use: hinge-mounted and fixed post also known as wall mounted.
Hinge-mounted doorstops remain out of the way and don't require drilling any holes into your wall. Fixed post doorstops require you to drill into your wall to mount them, and are best suited for heavy doors. Buy the doorstop s. Hinge-mounted doorstops consist of a small metal body, 2 rubber pads 1 of which is adjustable , and a metal ring. They are readily available at hardware stores and will fit nearly any door.
Pry the top hinge pin out. Close the door on which you are installing the stop, and use a flat-head screwdriver to pry the hinge pin out of the top hinge.
Place the tip of the screwdriver underneath the flared top of the hinge pin, and use the screwdriver as a lever to force it out.
Fit the hinge pin through the ring on the doorstop. Align the doorstop so that the adjustable rubber pad faces the wall, and the fixed pad sits flush against the door.
Hammer the hinge pin back into place. Adjust the doorstop to allow the desired opening distance. Twist the threaded rod attached to the adjustable pad to determine how far the door can be opened. This may require a flat-head screwdriver, or you may be able to grab the pad in your fingers and twist it. Method 2. Fixed post doorstops consist of a short, rigid post with a rubber pad on 1 end. The other end is affixed to your wall or baseboard, usually by drilling a hole and threading the stop into the hole.
Open your door until it is parallel with the wall. Using a pencil, mark the point on the baseboard that lines up with the edge of the door.
Now mark a second point that is 1. Be careful not to mark the point further away from the edge of the door than this, because if the doorstop is installed there it could punch a hole through a hollow-core door. Drill a hole into the baseboard to mount the doorstop. Screw the doorstop into the hole.
The doorstop will have 1 side with a threaded screw protruding from it; screw this end into the hole you drilled by rotating it clockwise until it is flush with the wall. Two, because the door is heavy and one will cause the hinge screws to wear out their cut. Put one in the top hinge and one in the bottom hinge. Not Helpful 0 Helpful 1. Include your email address to get a message when this question is answered. Fixed post doorstops are far more durable than spring-based doorstops.
Helpful 0 Not Helpful 0.
0コメント